1、首先是內部的軌道輪、鏈條清潔，我們可以采用市面上通用的WD40噴灑適量的防銹劑，然后做升降運動往返10次，讓WD40帶著灰塵雜質桅桿到底部，為了環?？紤]一定在底部做專門的接垃圾污染物的回收盤。
The first is an internal lift manufacturers analysis of rail wheels, chain cleaning, we can use a common market WD40 spray the right amount of rust, and then do the lifting movement back and forth 10 times to WD40 mast with dust and
impurities in the end part to protect the environment must be considered at the bottom of doing a special garbage pick contaminant recovery disk.
2、機器工作欄清潔：可選用專門的吸塵器進行清潔，每次工作完都要清潔一次，這樣清潔的好處是防止 雜物掉入桅桿，使機器損壞。
Lift manufacturers introduce clean machine working bar: You can use a special vacuum cleaner to clean, finished work must be cleaned once each, so the benefits of clean to prevent debris falling into the mast, so that damage to the machine.
3、機器桅桿外面及底座清潔，可用干毛巾擦拭污垢，難以清潔的污垢選擇一些中性的清潔劑輔助完成。
Speaking outside the factory lift mast and base machine clean, use a dry towel to wipe the dirt, it is difficult to clean the dirt choose some neutral detergent auxiliary complete.
4、提醒注意清潔輪子內的卡的如線、毛發之類的雜物，然后加適當的潤滑油。
Lift manufacturers such as draw attention to cleaning card inside line wheels, debris like hair, then add the appropriate lubricant.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
