升降機在使用中產生漏油是不可避免的，但是大家一定要引起重視，一般漏油時間過長會影響設備運轉。液壓油是在一個密閉的環境中運轉的，油質被打壓加油缸的摩擦就會發熱。發熱膨脹的油質加泵站的對油質的壓力，若有密封不嚴的話，液壓油便會漏出，過多的油管和接頭會加大漏油的現象。那么應該如何解決升降機漏油問題呢？
1、設備產生漏油后若不知如何處理，可先采用高分子復合材料加固化劑先把漏油處進行處理。
Lift manufacturers talked about how I do not know if after the oil spill handling equipment generates, you can first use of polymer composites reinforced agent for processing at the first oil spill.
2、強調設備如果使用時間過長，要對泵站和油質進行降溫。液壓設備在制作時，合理的油管長度也非常重要，有經驗的采購者要與設備方的技術人員提前確認設備的制造工藝，確保購入較為合理的設計，設備的接頭管件應選擇品質優秀的部品。
Lift equipment manufacturers stressed if used for too long, to be carried out on the pumping stations and oil cooling. Hydraulic equipment in the production, reasonable length of tubing is also very important to have experienced buyers in advance to confirm the device manufacturing process and technical personnel and equipment side, ensure joint fittings purchased more reasonable design, equipment should be selected outstanding quality parts.
3、建議設備購入后，日常的點檢和保養直接關系到設備的使用壽命，一年二次更換液壓油，更換時應按照設備出廠說明書中的操作認真完成，點檢中若發現滴漏，應停止作業，先更換設備附帶的密封備品。
Lift manufacturer recommends equipment purchased after the routine inspection and maintenance is directly related to the life of the equipment, replace the hydraulic oil twice a year, should be replaced with equipment manufactured in
accordance with the instructions carefully to complete the operation, inspection, if found leaking, should cease operations, the first that comes to replace the seal of spare equipment.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
