1、繼電器應在陰涼、干燥處使用，繼電器通常使用的交流電有380v、220v兩種，要選擇正確的接入電源。
Lift manufacturers introduce relay in cool, dry place for AC power relay Commonly used 380v, 220v two kinds to choose the right access to power.
2、軟引出端的繼電器，切勿往返彎折，并保證根部不受力，硬引出端的繼電器，在安裝時不可以彎折，防止玻璃絕緣子破裂而造成漏氣，選擇插座的時候也不可以過緊或者過松，這樣都會影響繼電器的使用，插座要保持清潔。
Lift manufacturer of relay terminals analysis software, not to bend back and forth, and to ensure that the roots from power, hard terminals of the relay, the installation can not be bent to prevent breakage of glass insulators and cause leakage, can not choose when the socket too tight or too loose, so that will affect the use of relays and sockets should be kept clean.
3、升降平臺廠家談到升降平臺焊接過程中要防止溫度過高，焊接溫度過高容易導致升降平臺的繼電器的線圈與引出端脫焊，會影
響到簧片觸點的性能，還會可能造成構件的開裂。
Speaking lifting platform lifts manufacturer welding process to prevent overheating, soldering temperature is too high and likely to lead to the coil of the relay terminals of sealing off the lifting platform, it will affect the performance reed contacts, but also may cause cracking member.
4、升降平臺廠家提醒升降平臺焊接完成后要進行清洗，防止焊接過程中產生有害物質影響到繼電器的使用。
Lift lifting platform manufacturers to remind cleaning after soldering to prevent harmful substances affect the use of the relay welding process.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
